16X2 I2C / Serial LCD

  • Shipping Weight: 0.2Kgs
  • 99 Units in Stock
Rs.350
Qty Discounts Off Price
1
Rs.350
Qty :
+
-

FEATURES:

  • Operating supply voltage 5 Volt.
  • Low standby current consumption.
  • High Speed I2C bus controlled.
  • I2C Slave LCD for almost any controller or processor.
  • Full Control of LCD with only Three Bytes of data.
  • LCD Contrast POT.
  • LCD Back light supported.
  • Easy To Use & very slim in size. 
GENERAL DESCRIPTION:

The AWI2C16LCD is an I2C controlled 16 X 2 LCD Module. You can use all LCD instructions and display as per your requirement, as simple as with normal parallel LCD (though it is simpler). You do not have to handle complex LCD routines. Only you have to do simple I2C routines as you normally write for any I2C Flash EEPROM. And at the same way you just send three consecutive bytes of data to this I2C module to display and control the LCD. That’s all. Please See bellow the table.

Command
D2
D1
D0

Clear Screen (CLS)

1
0
0
Cursor ON
2
0
0

Cursor OFF

3
0
0

Cursor Blink

4
0
0

cursor No Blink

5
0
0

Locate X,Y

6
X
Y
Home
6
1
0

Lower Line

6
X+1
0

LCD X

7
0
"X"

LCD HEX X

7
1
X

LCD BIN X

7
2
X

LCD Shift left

8
1
0

LCD shift Right

8
0
0
Display ON
9
0
0

Display OFF

10
0
0

Here data order should be D2 first and then D1 and at last D0. For more understanding of commands we have given a sample program in BASIC.

IMPORTANT: the address of this I2c Slave module is 70 HEX.
For More Information and sample code in BASCOM , Please download the Data sheet of the product.